Asynchronous Pulse Generator - IDEC FL1E-H12RCA User Manual

IDEC SmartRelay functions
Setting the Par parameter
View in programming mode (example):
B25
TL =02:00s
TH =03:00s
Press
B25
N =1
View in parameter assignment mode (example):
B25
TL =02:00s
TH =03:00s
Ta =01:15s
4.4.7

Asynchronous pulse generator

Short description
The output pulse shape can be modified by reconfiguring the
pulse/pause ratio.
Symbol in IDEC
SmartRelay
142
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1+R
Protection mode and retentivity
Interpulse width
Pulse width
2
Number of pulse/pause cycles
(example)
Current pulse width TL or TH
Wiring
Input En You can use input EN to set and reset
the asynchronous pulse generator.
Input INV Input INV can be used to invert the
output signal of the active
asynchronous pulse generator.
Parameter You can configure the pulse width T
and the interpulse width T
Retentivity: 
/ = No retentivity
R = The status is retentive.
Output Q Q is set and reset cyclically according
to the pulse/pause ratio T
Description
.
L
and T
H
IDEC SmartRelay Manual
H
.
L