IDEC FL1E-H12RCA User Manual page 215

5. If your message text has lines that tick, press
position the cursor on the "Ch by Ch" line and then press
TickType.
6. From the Tick T ype screen, press
ticking for each line of the message text. IDEC
SmartRelay displays the following screen form:
7. Press
whether line 1 ticks.
8. Press
the last line press
and 4. Configure line ticking for lines 3 and 4 in the same
way as for lines 1 and 2.
9. Press OK to confirm the complete message text
configuration.
Visible parameters or process variables
The following parameters or process variables can be
displayed in a message text, as either numerical values or
bar-graph representations of values:
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
B33 3+/
TickType
Ch by Ch
or to select either "Ch by Ch" or "Ln by Ln" for the
B33 4+/
1 = No
2 = No
or to choose between "No" and "Yes" to define
to move the cursor to the second line, and press
or to choose between "No" and "Yes" for line 2. From
B33 5+/
3 = No
4 = No
IDEC SmartRelay functions
Tick Type: Character by Character
(Ch by Ch) or Line by Line (Ln by
Ln)
to enable or disable
Tick settings:
No: Line does not tick
Yes: Line does tick
to go to the screen from for lines 3
Tick settings:
No: Line does not tick
Yes: Line does tick
to
201