IDEC FL1E-H12RCA User Manual page 64

IDEC SmartRelay installation and wiring
Warning
!
The AS-Interface and IDEC SmartRelay systems must never be
connected together electrically!
Use safe isolation acc. to IEC 61131-2, EN 50178, UL 508, CSA
C22.2 No. 42.
Logic Assignments
IDEC SmartRelay sys-
Outputs
"n" depends on the plug–in position of the expansion module
relative to the IDEC SmartRelay base module. It indicates
the number of the input or output in IDEC SmartRelay
program code.
Note
Ensure that there is enough space for the inputs/outputs of the AS
interface in the IDEC SmartRelay's address space. If you are
already using more than 12 physical outputs or more than 20
physical inputs, it is no longer possible to operate the CM AS
interface!
50
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
tem
Inputs
I
n
I
n+1
I
n+2
I
n+3
Q
n
Q
n+1
Q
n+2
Q
n+3
AS Interface system
Output data bits
D0
D1
D2
D3
Output data bits
D0
D1
D2
D3
IDEC SmartRelay Manual