Previous Solution - IDEC FL1E-H12RCA User Manual

Applications
8.6.2

Previous solution

L1
lx>
B1 E1
E1
K1 K2
N
The lamps are switched on and off with current impulse
relays, by means of pushbutton control at the door.
Regardless of this, they are reset with a timer or daylight
control switch signal at the central off input. The pulse width
of the off commands must be reduced by means of interval
time-delay relays to allow operation of the lights after they
are switched off.
Components required:
• Pushbuttons S1 to S4
• Daylight control switch B1
• Timer E1
• Interval time-delay relays K1 and K2
• Pulse switches K3 to K6 with central OFF function
Disadvantages of the previous solution
• A substantial amount of switchgear needs to be installed
to implement the necessary functions.
• Due to the large number of mechanical components, high
wear and tear and maintenance expenditure is to be
expected.
• The modification of functions involves considerable
effort.
290
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
S1 S2
K1 K2
K3 K4
S3 S4
K2 K3 K4
K5 K6 E2 E3
IDEC SmartRelay Manual
K5 K6
E4 E5