IDEC FL1E-H12RCA User Manual page 93

uppercase letters for the password, you can quickly access
letters "at the end" of the alphabet (in this example, English)
by using the
Press
Press
Let us assign the password "AA" to our first circuit program.
The display now shows:
Old:
No Password
New:
This procedure is the same as for entering the name of the
circuit program. Select "New" and enter:
3. Select " A":
4. Move to the next letter:
5. Select " A":
The display now shows:
Old:
No Password
New:
AA
6. Confirm the password:
Your circuit program is now protected with the password
"AA", and you are returned to the programming menu.
Note
You can cancel the input of a new password with ESC. In this case,
IDEC SmartRelay returns to the programming menu without saving
the password.
You can also set your password using WindLGC. You cannot edit
a password-protected circuit program on IDEC SmartRelay or
upload it to WindLGC unless you enter the correct password.
To allow you to create and edit a circuit program for a protected
module (Card), you first need to assign a password to this new
program (see Chapter 6.1).
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
button:
once to select "Z"
twice to select "Y", etc.
Programming IDEC SmartRelay
Press
Press
Press
Press OK
79