IDEC SmartRelay memory and battery cartridge (card)
6.1 Security function (CopyProtect)
The secuirty function provides copy protection for circuit
programs on memory cartridges or combined memory/
battery cartridges.
Unprotected memory cartridges
You can edit circuit programs without restrictions and
exchange data between the memory cartridge or combined
memory/battery cartridge and the device.
Protected memory cartridges
A circuit program is protected when it is transferred from a
protected program memory cartridge or combined memory/
battery cartridge to IDEC SmartRelay.
To execute this circuit program in IDEC SmartRelay, the
protected cartridge must remain inserted during RUN; that
is, the circuit program stored on the cartridge cannot be
copied to other IDEC SmartRelay devices.
Over and above that, a protected circuit program is write-
protected.
A circuit program with password protection is no longer
protected after the correct password has been entered; that
is, you can then edit the program and remove the memory
cartridge or combined memory/battery cartridge.
Note
When you create the circuit program for a memory cartridge or
combined memory/battery cartridge, you need to assign a
password to be able to edit it at a later time (see Chapter 3.6.5).
Correlation between the password and the protective function
Password Protection
-
Yes
-
Yes
250
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Editing
-
Yes
Yes, with
-
password
Yes
No
Yes, with
Yes
password
Copying
Deleting
Yes
Yes
Yes, with
Yes
password
No
Yes
Yes, with
Yes, with
password
password
IDEC SmartRelay Manual