Wiring Idec Smartrelay - IDEC FL1E-H12RCA User Manual

IDEC SmartRelay installation and wiring

2.3 Wiring IDEC SmartRelay

Wire IDEC SmartRelay using a screwdriver with a 3-mm
blade.
You do not need wire ferrules for the terminals. You can use
conductors with cross-sections of up to the following
thicknesses:
• 1 x 2.5 mm
• 2 x 1.5 mm
Tightening torque: 0.4...0.5 Nm or 3...4 in-lbs.
Recommended ferrules
Ferrules order No.
For 1-cable connection
Cross-section
AWG
2
[mm ]
0.3 22
0.5 20
0.75 18
1.25 18
2.0 16
Recommended
crimping tool
For 2-cable connection
Cross-section
AWG
2
[mm ]
0.3 22
0.5 20
0.75 18
1.25 18
Recommended
crimping tool
Note
Always cover the terminals after you have completed the
installation. To protect IDEC SmartRelay adequately from
impermissible contact to live parts, comply with local standards.
32
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
2
2
for each second terminal chamber
Phoenix Contact
Ferrule type No.
AI0,5-10WH
AI0,5-10WH
AI0,75-8GY
AI1,5-8BK
AI2,5-8BU
CRIMPFOX ZA 3
Phoenix Contact
Ferrule type No.
AI-TWIN2X0,5-8WH
AI-TWIN2X0,5-8WH
AI-TWIN2X0,75-8GY
AI-TWIN2X1,5-8BK
CRIMPFOX ZA 3
NIC HIFU
Blade Terminals Insulated Pin Terminals
type No.
BT1.25-10-1
TGN-TC-1.25-11T
BT1.25-10-1
BT2-9-1
BT2-9-1
NH1
NH61
IDEC SmartRelay Manual
NIC HIFU
type No.


NH11
NH32
NH65