Wall-Mounting - IDEC FL1E-H12RCA User Manual

2.2.2

Wall-mounting

For wall-mounting, first slide the mounting slides on the rear
side of the devices towards the outside. You can now wall-
mount IDEC SmartRelay by means of two mounting slides
and two
Drilling template for wall-mounting
Before you can wall-mount IDEC SmartRelay, you need to
drill holes using the template shown below.
All dimensions in mm
Bore hole for
1) IDEC SmartRelay base module
2) IDEC SmartRelay expansion modules
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
IDEC SmartRelay installation and wiring

M4 screws (tightening torque 0.8 to 1.2 Nm).
Mounting slides
+0.2
53.5–0.0
1

M4 screw, tightening torque 0.8 to 1.2 Nm
+0.2
35.5–0.0
2
2
n x 35.5–0.0
2
+0.2
29