IDEC FL1E-H12RCA User Manual page 67

Before power off
No Program
Press ESC
No program in
memory
Mo 09:00
2003-01-27
I:
0.. 123456789
1..0123456789
2..01234
Q:
0..123456789
1..0123456
B3:
Par = 0300
Cnt = 0028
IDEC SmartRelay
in RUN mode
&
Program in
memory
You can also memorize four simple rules for starting IDEC
SmartRelay :
1. If neither IDEC SmartRelay nor the inserted memory
cartridge or combined memory/battery cartridge contains
a circuit program, IDEC SmartRelay (with display unit)
reports: 'No Program / Press ESC'.
2. A circuit program on the memory cartridge or combined
memory/battery cartridge is automatically copied to IDEC
SmartRelay. The circuit program in IDEC SmartRelay is
overwritten.
3. If there is a circuit program in IDEC SmartRelay or on the
memory cartridge or combined memory/battery cartridge,
IDEC SmartRelay adopts the operational state it had prior
to POWER-OFF. Versions without display unit (FL1E-
B12...) automatically change from STOP to RUN (LED
changes from red to green).
IDEC SmartRelay Manual
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
IDEC SmartRelay installation and wiring
or
(empty)
(with program)
or
(empty)
(with program)
B1
or
Q1
(empty)
(with program)
After power on
No program
Press ESC
>Program..
Card..
Setup..
Start
with stored program from
Mo 09:00
2002-01-31 IDEC SmartRelay
I:
0.. 123456789
1..0123456789
2..01234
IDEC SmartRelay in
RUN mode
with a program copied from
Mo 09:00
the memory cartridge or
2008-05-05
I:
combined memory/battery
0.. 123456789
cartridge in IDEC
1..0123456789
SmartRelay
2..01234
with stored program from
>Program..
IDEC SmartRelay
Card..
Setup..
Start
with program copied from
>Program..
the memory cartridge or
Card..
Setup.. combined memory/battery
Start
cartridge in IDEC
SmartRelay
53