IDEC FL1E-H12RCA User Manual page 148

IDEC SmartRelay functions
The view in parameter assignment mode (example):
B12
T T
Ta =02:00h
Timing diagram
Trg
T expires
a
Functional description
The time T
(T is the current IDEC SmartRelay time).
a
If the status of input Trg is 1 at least for the duration of the
configured time T, the output is set to 1 on expiration of this
time (the output follows the input with on-delay).
The time is reset when the status at input Trg returns to 0
before the time T has expired.
The output is reset to 0 when the signal at input Trg is 0.
If retentivity is not set, output Q and the expired time are
reset after a power failure.
134
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
=04:10 =04:10h
Q
T
is triggered with a 0 to 1 transition at input Trg
a
B12
T
or
current
Ta =02:00h
time
The bold section of the
timing diagram is also
shown in the on-delay
icon.
T
IDEC SmartRelay Manual
B006m