Request System Software Delete - Dell PowerConnect J-EX4200-24T Software Manual

request system software delete

Syntax
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
request system software delete software-package
<force>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Remove a software package or bundle from the router or switch.
CAUTION: Before removing a software package or bundle, make sure that
you have already placed the new software package or bundle that you intend
to load onto the router or switch.
—Software package or bundle name. You can delete any or all of the
software-package
following software bundles or packages:
—(Optional) Junos OS base software suite
jbase
—(Optional, in domestic version only) Junos OS security software
jcrypto
jdocs —(Optional) Junos OS online documentation file
jkernel —(Optional) Junos OS kernel software suite
—(Optional) Junos OS Packet Forwarding Engine support
jpfe
—(Optional) Junos OS routing software suite
jroute
—(Optional) Junos OS base software
junos
—(Optional) Ignore warnings and force removal of the software.
force
Before upgrading the software on the router or switch, when you have a known stable
system, issue the
request system snapshot
the configuration, to the
/altroot
the software on the router or switch and are satisfied that the new packages are
successfully installed and running, issue the
to back up the new software to the
command, you cannot return to the previous version of the
request system snapshot
software, because the running and backup copies of the software are identical.
maintenance
request system software add on page 108
request system software rollback on page 113
request system software validate on page 115
request system software delete jdocs on page 112
Chapter 10: Operational Mode Commands for Software Installation
command to back up the software, including
and file systems. After you have upgraded
/altconfig
request system snapshot
and
/altroot /altconfig
command again
file systems. After you run the
111