Deleting Licenses - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Related
Documentation
Managing Licenses for the J-EX Series Switch (J-Web Procedure)
84

Deleting Licenses

To delete one or more license keys from the switch with the CLI, specify the license ID:
user@switch> request system license delete license-id
You can delete only one license at a time.
Saving License Keys
To save the installed license keys to a file (which can be a URL) or to the terminal:
user@switch> request system license save filename | url
For example, the following command saves the installed license keys to a file named
:
license.conf
user@switch> request system license save ftp://user@switch/license.conf
Managing Licenses for the J-EX Series Switch (J-Web Procedure) on page 84
Monitoring Licenses for the J-EX Series Switch on page 88
Understanding Software Licenses for the J-EX Series Switch on page 65
To enable and use some Junos OS features on a J-EX Series switch, you must purchase,
install, and manage separate software licenses. Each switch requires one license. For a
Virtual Chassis deployment, two licenses are recommended for redundancy. After you
have configured the features, you see a warning message if the switch does not have a
license for the feature.
Before you begin managing licenses, be sure that you have:
Obtained the needed licenses. For information about how to purchase software licenses,
contact Dell.
Understand what makes up a license key. For more information, see "License Key
Components for the J-EX Series Switch" on page 66.