Request System Snapshot - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

request system snapshot

Syntax
Release Information
Description
Options
106
request system snapshot
<as-primary>
<all-members | local | member member-id>
<media (external | internal)>
<partition>
<re0 | re1 | routing-engine routing-engine-id>
<slice (1 | 2 | alternate)>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Take a snapshot of the files currently used to run the switch—the complete contents of
the and directories, which include the running Junos OS, the active
/config /var
configuration, and the rescue configuration—and copy all of these files into an alternate
(internal, meaning internal flash, or an external, meaning USB flash) memory source.
none —Create a snapshot on the alternate media, meaning the external media if you
booted the switch using software stored on internal media or internal media if you
booted the switch using software stored on external media.
all-members | local | member member-id
where to place the snapshot in Virtual Chassis configurations:
—Create a snapshot for each switch that is a member of the Virtual
all-members
Chassis.
—Create a snapshot on the local switch only.
local
member member-id
switches of the Virtual Chassis.
as-primary —(Optional) Create a bootable snapshot.
NOTE: The snapshot is always bootable on J-EX Series switches. The
as-primary
media ( external | internal )
snapshot. The external
device, such as a USB flash drive. The
internal memory source, such as internal flash memory.
—(Optional) Partition the destination media before copying over the snapshot.
partition
re0 | re1 | routing-engine routing-engine-id
place the snapshot in dual Routing Engine configurations.
—Create a snapshot on Routing Engine 0.
re0
—Create a snapshot on Routing Engine 1.
re1
—(J-EX4200 switch only) (Optional) Specify
—Create a snapshot for the specified member or member
option has no effect on snapshots on J-EX Series switches.
—(Optional) Specify the destination media location for the
option copies the snapshot to an external mass storage
option copies the snapshot to an
internal
—(J-EX8200 switch only) Specify where to