Request System Software Add - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

request system software add

Syntax
Release Information
Description
Options
108
request system software add package-name
<best-effort-load>
<delay-restart>
<force>
<no-copy>
<no-validate>
<re0 | re1>
<reboot>
<unlink>
<validate>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Install a software package or bundle on the router or switch.
package-name —Location from which the software package or bundle is to be installed.
For example:
/var/tmp/package-name
from a local directory on the router or switch.
protocol://hostname/pathname/package-name
that is to be downloaded and installed from a remote location. Replace
with one of the following:
—File Transfer Protocol.
ftp
Use
ftp://hostname/pathname/package-name
credentials, use
ftp://<username>:<password>@hostname/pathname/package-name
the system prompt you for the password, specify
password. If a password is required, and you do not specify the password or
prompt , an error message is displayed.
—Hypertext Transfer Protocol.
http
Use http://hostname/pathname/package-name
credentials, use
http://<username>:<password>@hostname/pathname/package-name
password is required and you omit it, you are prompted for it.
—Secure copy (available only for Canada and U.S. version).
scp
Use scp://hostname/pathname/package-name
credentials, use
scp://<username>:<password>@hostname/pathname/package-name
NOTE: The
home directory on the remote system and not the root directory.
—For a software package or bundle that is being installed
in the protocol is the relative path to the user's
pathname
—For a software package or bundle
. To specify authentication
. To have
in place of the
prompt
. To specify authentication
. To specify authentication
.
protocol
. If a