Diagnostic Screens
Diagnostics Menu
Access to the diagnostic screens is only available after a connection to the flowmeter
has been established as described in section 3.2
The FS200 utility has two Diagnostic screens: Signal Graph and Meter Diagnostic, they
are selected by clicking on [Diagnostics] in the FS200 menu bar.
5.1 Signal Graph
The Signal Graph screen allows you to view real-time digitized transducer receive
signals for any operational flowmeter path. This feature is useful for diagnosing
waveform problems such as those caused by liquid aeration, noise interference, or poor
transducer match to pipe.
14
Figure 5-1 Diagnostics Menu
Figure 5-2 Signal Graph Screen
5
FS200 Programming Manual, 03/2020,
A5E02951525-AB