Measurement Views - Siemens SITRANS FC330 Operating Instructions Manual

1
4
①
②
③
④
7.1.4

Measurement views

Single value
1
①
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
3
Long TAG
View number
Alarm status text
Alarm icon
Process value The user-defined process value to be displayed is configured in menu 2
"Setup" → 2.8 "Local display" → 2.8.5 ... 2.8.10 "View" (1-6).
2
Describes the measurement point and is shown in all operation views.
Can be changed via the menu "Long tag" (3.1.1).
Shows the operation view number. The number refers to the view num‐
ber configured in the menu "Setup" → "Local display" (2.8).
Describes the alarm. Only shown if an alarm is active.
Indicates an active alarm. Shows the alarm class, see Device status
symbols (Page 167).
Only shown if an alarm is active.
Operating
7.1 Local operation (HMI)
111