Activating / Deactivating Expanded Visibility - Siemens FC7xx Operation Manual

5.8.2 Activating / deactivating expanded visibility

Building Technologies
Fire Safety
The 'Activate expanded visibility' function can be assigned to a favorite to make it
easier to find.
Activation can be configured depending on the condition.
Activating the function 'Expanded visibility'
ϖ The ↑ 'Station' is configured for 'Expanded visibility'.
1. Select 'Main menu' > 'Topology'.
 The three partial trees of the 'Topology' are displayed.
2. Select 'Hardware tree'.
 The elements in 'Hardware tree' are displayed.
3. Select 'Station' and press the 'Lower level' softkey.
 The elements of 'Station' are displayed.
4. Select 'PMI' and press the 'Lower level' softkey.
 The elements of 'PMI' are displayed.
5. Select the 'expand.' element and press the 'More Options' softkey or the
command at the bottom directly, depending on the 'Access level'.
 The 'Selection option' window is displayed depending on the 'Access level'.
6. Select 'Execute commands'.
 The 'Select command' window is displayed.
7. Select 'Activate expanded visibility'
 'Expanded visibility' is activated.
Deactivating the 'Expanded visibility' function
1. Select 'Main menu' > 'Message summary'.
 The message categories containing messages are displayed.
2. Select 'Information'.
3. 'PMI expanded visibility' is shown.
4. Select this element.
5. Press <Execute Commands>.
6. Select 'Deactivate expanded visibility'.
 'PMI expanded visibility' is deactivated.
See also
1 Expanded visibility [➙ 119]
Operation
5
Changing visibility
61 | 184
A6V10211076_i_en_--
2015-12-15