Engineering
9
Editing zone and device name
9.2 Editing zone and device name
9.2.1 On-screen keyboard
9.2.2 Entering text
88 | 151
The 'Edit name' function is used to edit the name of a zone or device. The new
name is shown when the zone or device is re-accessed.
1. Press
on the keypad.
The 'Main menu' window is open.
2. Select 'Engineering' and press
The 'Engineering' window is open.
3. Select 'Edit name / password' and press
The 'Edit name / password' window is open.
4. Select 'Edit name' and press
The 'Edit name' window is open. A list of all zones is displayed.
5. Select a desired zone and press
The selected zone and the devices under the zone are listed.
6. Select the zone and press
A name entry dialog window is open.
7. Enter a name and confirm with
The name of the zone or device is changed.
Use the on-screen keyboard to enter letters, numbers and special characters.
1
Displays numbers, punctuation marks and common symbols.
2
Displays extra characters for specific languages.
3
Displays uncommon symbols.
4
Enters a carriage return.
5
Enters a space after the cursor.
6
Deletes a character before the cursor.
7
Switches between lower cases and upper cases.
●
Press
or
to select text.
●
Select
for more symbols or characters.
●
Select
to go back to the default main page.
●
Press
to confirm text input.
.
.
.
.
, or select a device and press
.
.
A6V10421795_en--_k