Qos Car (User Profile View) - HPE FlexNetwork HSR6800 series Command Reference Manual

<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos car outbound any cir 200 cbs 5120 ebs 0 green pass red
remark-prec-pass 0
Related commands
display qos car interface
qos carl

qos car (user profile view)

Use qos car to configure a CAR policy for a user profile.
Use undo qos car to delete a CAR policy from a user profile.
Syntax
qos car { inbound | outbound } any cir committed-information-rate [ cbs committed-burst-size
[ ebs excess-burst-size ] ]
qos car { inbound | outbound } any cir committed-information-rate [ cbs committed-burst-size ] pir
peak-information-rate [ ebs excess-burst-size ]
undo qos car { inbound | outbound }
Default
No CAR policy is configured for a user profile.
Views
User profile view
Predefined user roles
network-admin
Parameters
inbound: Performs CAR for incoming traffic (traffic sent by the online users).
outbound: Performs CAR for outgoing traffic (traffic received by the online users).
any: Performs CAR for all IP packets in the specified direction.
cir committed-information-rate: Specifies the CIR in kbps.
cbs committed-burst-size: Specifies the CBS in bytes, which is the size of bursty traffic when the
actual average rate is not greater than the CIR.
ebs excess-burst-size: Specifies the EBS in bytes.
pir peak-information-rate: Specifies the PIR in kbps.
Usage guidelines
To use two rates for traffic policing, configure the qos car command with the pir
peak-information-rate option. To use one rate for traffic policing, configure the qos car command
without the pir peak-information-rate option.
The conforming traffic is permitted to pass through, and the excess traffic is dropped.
If you execute the qos car command multiple times for the same user profile, the most recent
configuration takes effect.
Examples
# Perform CAR for packets received by user profile user. The CAR parameters are as follows:
76