Ebs - HPE FlexNetwork HSR6800 series Command Reference Manual

Serial2/1/1.1
fr-class ts2
fr dlci 222
fr-class ts
# Display the associations between the FR class ts and interfaces.
<Sysname> display fr class-map fr-class ts
Serial2/1/1
fr dlci 100
fr-class ts
Serial2/1/1.1
fr dlci 222
fr-class ts
Table 37 Command output
Field
Serial2/1/1
fr-class ts1
fr dlci 100
fr-class ts
Serial2/1/1.1
fr-class ts2
fr dlci 222
fr-class ts

ebs

Use ebs to set the EBS for an FR class.
Use undo ebs to delete the EBS setting of an FR class.
Syntax
ebs [ inbound | outbound ] excess-burst-size
undo ebs [ inbound | outbound ]
Default
The EBS for an FR class is 0 bits.
Views
FR class view
Predefined user roles
network-admin
Parameters
inbound: Sets the EBS for incoming packets. The inbound EBS does not take effect for FRTS.
outbound: Sets the EBS for outgoing packets. The outbound EBS does not take effect for FRTP.
excess-burst-size: Sets the EBS in the range of 0 to 16000000 bits.
Description
FR interface and the FR class associated with the FR interface.
PVC on the FR interface and the FR class associated with the
PVC.
FR subinterface and the FR class associated with the FR
subinterface.
PVC on the FR subinterface and the FR class associated with
the PVC.
128