Qos Lr - HPE FlexNetwork HSR6800 series Command Reference Manual

CIR 1024 (kbps), CBS 64000 (Bytes), EBS 0 (Bytes)
Passed
Delayed
Active shaping: No
Table 25 Command output
Field
Interface
L2VPN-PW
Direction
CIR
CBS
EBS
Passed
Delayed
Active shaping

qos lr

Use qos lr to configure rate limiting on an interface or PW.
Use undo qos lr to delete the rate limit configuration.
Syntax
qos lr outbound
excess-burst-size ] ]
undo qos lr outbound
Default
No rate limit is configured on an interface or PW.
Views
Cross-connect PW view
VSI LDP PW view
VSI static PW view
Interface view
Predefined user roles
network-admin
: 0 (Packets) 0 (Bytes)
: 0 (Packets) 0 (Bytes)
Description
Interface name, including the interface type and interface number.
A PW is uniquely identified by a combination of the peer PE IP address and PW ID.
Direction to which the rate limit configuration is applied. Only the outbound direction is
supported in the current software version.
CIR in kbps (if the CIR is specified in absolute value) or in percentage (if the CIR is
specified in percentage).
CBS in bytes (if the CBS is specified in absolute value) or in ms (if the CBS is specified
in milliseconds). When the CBS is specified in milliseconds, the actual CBS value is
cbs-time × the actual CIR value.
EBS in bytes (if the EBS is specified in absolute value) or in ms (if the EBS is specified
in milliseconds). When the EBS is specified in milliseconds, the actual EBS value is
ebs-time × the actual CIR value.
Number and bytes of packets that have passed.
Number and bytes of delayed packets.
Indicates whether the rate limit configuration is activated:
•
Yes—Activated.
•
No—Not activated.
cir committed-information-rate [ cbs
82
committed-burst-size [ ebs