Display Qos Policy Advpn - HPE FlexNetwork HSR6800 series Command Reference Manual

Marking:
Remark mpls-exp 4
Classifier: 3 (ID 102)
Behavior: 3
-none-
# Display the system-defined QoS policy (default).
<Sysname> display qos policy system-defined
System-defined QoS policy information:
Policy: default (ID 0)
Classifier: default-class (ID 0)
Behavior: be
-none-
Classifier: ef (ID 1)
Behavior: ef
Expedited Forwarding:
Bandwidth 20 (%) Cbs-ratio 25
Classifier: af1 (ID 2)
Behavior: af
Assured Forwarding:
Bandwidth 20 (%)
Discard Method: Tail
Classifier: af2 (ID 3)
Behavior: af
Assured Forwarding:
Bandwidth 20 (%)
Discard Method: Tail
Classifier: af3 (ID 4)
Behavior: af
Assured Forwarding:
Bandwidth 20 (%)
Discard Method: Tail
Classifier: af4 (ID 5)
Behavior: af
Assured Forwarding:
Bandwidth 20 (%)
Discard Method: Tail
For the output description, see

display qos policy advpn

Use display qos policy advpn to display QoS policies applied to hub-spoke tunnels on a tunnel
interface.
Syntax
display qos policy advpn tunnel number [ ipv4-address | ipv6-address ] [ outbound ]
Views
Any view
Table 15 and Table 17.
57