Qos Reserved-Bandwidth - HPE FlexNetwork HSR6800 series Command Reference Manual

BE Queues: Active/Max active/Total 0/0/256
AF Queues: Allocated 1
Bandwidth(kbps): Available/Max reserve 74992/75000
Table 35 Command output
Field
Interface
L2VPN-PW
Size
Length
Discards
EF
AF
BE
Active
Max active
Total
Available
Max reserve

qos reserved-bandwidth

Use qos reserved-bandwidth to set the maximum reserved bandwidth as a percentage of available
bandwidth on an interface.
Use undo qos reserved-bandwidth to restore the default.
Syntax
qos reserved-bandwidth pct percent
undo qos reserved-bandwidth
Default
The maximum reserved bandwidth is 80% of available bandwidth on the interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
percent: Specifies the percentage of available bandwidth to be reserved. The value range for this
argument is 1 to 100.
Usage guidelines
The maximum reserved bandwidth is set on a per-interface basis. It decides the maximum
bandwidth assignable for the QoS queues on an interface. It is typically set no greater than 80% of
available bandwidth, considering the bandwidth for control traffic and Layer 2 frame headers.
Description
Interface name, including the interface type and interface number.
A PW is uniquely identified by a combination of the peer PE IP
address and PW ID.
Total number of bytes of packets in all queues.
Number of packets allowed in each queue.
Number of dropped packets.
EF queue.
AF queue.
BE queue.
Number of active BE queues.
Maximum number of active BE queues allowed.
Total number of BE queues.
Available bandwidth for CBQ.
Maximum reserved bandwidth for CBQ.
107