Display Packet-Filter Verbose - HPE FlexNetwork HSR6800 series Command Reference Manual

Related commands
reset packet-filter statistics

display packet-filter verbose

Use display packet-filter verbose to display ACL application details for packet filtering.
Syntax
In standalone mode:
display packet-filter verbose interface interface-type interface-number { inbound | outbound }
[ [ ipv6 ] { acl-number | name acl-name } ] [ slot slot-number ]
In IRF mode:
display packet-filter verbose interface interface-type interface-number { inbound | outbound }
[ [ ipv6 ] { acl-number | name acl-name } ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
ipv6: Specifies the IPv6 ACL type.
acl-number: Specifies an ACL by its number. The following are available value ranges:
•
2000 to 2999 for basic ACLs.
•
3000 to 3999 for advanced ACLs.
name acl-name: Specifies an ACL by its name. The acl-name argument is a case-insensitive string
of 1 to 63 characters.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays ACL application details for packet filtering for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
ACL application details for packet filtering for the global active MPU. (In IRF mode.)
Usage guidelines
If you do not specify acl-number, name acl-name, or ipv6, this command displays application details
of IPv4 ACLs for packet filtering.
To specify the IPv4 ACL type, do not specify the ipv6 keyword.
Examples
# Display application details of all ACLs for inbound packet filtering on GigabitEthernet 2/1/1.
<Sysname> display packet-filter verbose interface gigabitethernet 2/1/1 inbound
Interface: GigabitEthernet2/1/1
Inbound policy:
13