Fragment Size; Fr Class - HPE FlexNetwork HSR6800 series Command Reference Manual

Default
End-to-end FRF.12 fragmentation is disabled for an FR class.
Views
FR class view
Predefined user roles
network-admin
Usage guidelines
This command enables end-to-end FRF.12 fragmentation on all PVCs associated with an FR class
or PVCs of all interfaces associated with an FR class.
Examples
# Enable Frame Relay FRF.12 fragmentation for FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fragment enable

fragment size

Use fragment size to set the fragment size allowed for an FR class.
Use undo fragment size to restore the default.
Syntax
fragment size size
undo fragment size
Default
The fragment size allowed for an FR class is 45 bytes.
Views
FR class view
Predefined user roles
network-admin
Parameters
size: Specifies the fragment size in the range 16 to 1600 bytes.
Examples
# Set the fragment size to 128 bytes for FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fragment size 128

fr class

Use fr class to create an FR class and enter its view, or enter the view of an existing FR class.
Use undo fr class to delete an FR class.
Syntax
fr class class-name
130