HPE FlexNetwork HSR6800 series Command Reference Manual page 42

Table 16 Available match criteria
Option
acl [ ipv6 ] { acl-number |
name acl-name }
app-group group-name
application app-name
any
classifier classifier-name
customer-dot1p
dot1p-value&<1-8>
destination-mac mac-address
dscp dscp-value&<1-8>
inbound-interface
interface-type
interface-number
ip-precedence
ip-precedence-value&<1-8>
local-precedence
local-precedence-value&<1-8>
mpls-exp exp-value&<1-8>
packet-length { min min-value
| max max-value } *
protocol protocol-name
qos-local-id local-id-value
Description
Matches an ACL.
The value range for the acl-number argument is 2000 to 5999 for IPv4
ACLs and 2000 to 5999 for IPv6 ACLs.
The acl-name argument is a case-insensitive string of 1 to 63 characters,
which must start with an English letter. To avoid confusion, make sure the
argument is not all.
Matches an application group.
The group-name argument specifies a system-defined application group
by its name.
Matches an application.
The app-name argument specifies a system-defined application by its
name.
Matches all packets.
Matches a class.
The classifier-name argument specifies a class by its name.
Matches 802.1p priority values in inner VLAN tags of double-tagged
packets.
The dot1p-value&<1-8> argument specifies a space-separated list of up to
eight 802.1p priority values. The value range for the dot1p-value argument
is 0 to 7.
Matches a destination MAC address.
Matches DSCP values.
The dscp-value&<1-8> argument specifies a space-separated list of up to
eight DSCP values. The value range for the dscp-value argument is 0 to
63 or keywords shown in
Matches an input interface specified by its type and number.
Matches IP precedence values.
The ip-precedence-value&<1-8> argument specifies a space-separated
list of up to eight IP precedence values. The value range for the
ip-precedence-value argument is 0 to 7.
Matches local precedence values.
The local-precedence-value&<1-8> argument specifies a
space-separated list of up to eight local precedence values. The value
range for the local-precedence-value argument is 0 to 7.
Matches MPLS EXP values.
The exp-value&<1-8> argument specifies a space-separated list of up to
eight EXP values. The value range for the exp-value argument is 0 to 7.
Matches the packet length.
The min-value argument specifies the minimum packet length in bytes.
The max-value argument specifies the maximum packet length in bytes.
Matches a protocol.
The protocol-name argument can be arp, ip, or ipv6.
Matches a local QoS ID in the range of 1 to 4095.
37
Table 18.