Packet-Filter Default Deny; Packet-Filter Default Hardware-Count - HPE FlexNetwork HSR6800 series Command Reference Manual

packet-filter default deny

Use packet-filter default deny to set the packet filtering default action to deny. The packet filter
denies packets that do not match any ACL rule.
Use undo packet-filter default deny to restore the default.
Syntax
packet-filter default deny
undo packet-filter default deny
Default
The packet filtering default action is permit. The packet filter permits packets that do not match any
ACL rule.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The packet filter applies the default action to all ACL applications for packet filtering. The default
action appears in the display command output for packet filtering.
Examples
# Set the packet filter default action to deny.
<Sysname> system-view
[Sysname] packet-filter default deny
Related commands
display packet-filter
display packet-filter statistics
display packet-filter verbose

packet-filter default hardware-count

Use packet-filter default hardware-count to enable hardware-count for the packet filtering default
action.
Use undo packet-filter default hardware-count to disable hardware-count for the packet filtering
default action.
Syntax
packet-filter default { inbound | outbound } hardware-count
undo packet-filter default { inbound | outbound } hardware-count
Default
Hardware-count is disabled for the packet filtering default action.
Views
Interface view
Predefined user roles
network-admin
17