Examples
# Display the FIFO information for all interfaces.
<Sysname> display qos queue fifo interface
Interface: GigabitEthernet2/1/2
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
# Display the FIFO information for all PWs.
<Sysname> display qos queue fifo l2vpn-pw
L2VPN-PW: peer 1.1.1.1, pw-id 1
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Table 28 Command output
Field
Interface
L2VPN-PW
Size
Length
Discards
qos fifo queue-length
Use qos fifo queue-length to set the FIFO queue length.
Use undo qos fifo queue-length to restore the default.
Syntax
qos fifo queue-length queue-length
undo qos fifo queue-length
Default
The FIFO queue length is 75.
Views
Cross-connect PW view
VSI LDP PW view
VSI static PW view
Interface view
Predefined user roles
network-admin
Parameters
queue-length: Specifies the queue length in the range of 1 to 1024.
Description
Interface name, including the interface type and interface number.
A PW is uniquely identified by a combination of the peer PE IP
address and PW ID.
Total number of bytes of packets in all queues.
Number of packets allowed in each queue.
Number of packets dropped.
87