qos pq
Use qos pq to apply a PQ list to an interface.
Use undo qos pq to restore the default.
Syntax
qos pq pql pql-index
undo qos pq
Default
An interface uses FIFO queuing.
Views
Interface view
Predefined user roles
network-admin
Parameters
pql pql-index: Specifies a PQ list by its number in the range of 1 to 16.
Usage guidelines
If you execute this command multiple times on an interface, the most recent configuration takes
effect.
Multiple match criteria can be configured for a PQ list. When a packet arrives, it is examined against
match criteria in their configuration order.
•
When a match is found, the packet is assigned to the corresponding queue, and the matching
process ends.
•
If no match is found, the packet is assigned to the default queue.
Examples
# Apply PQ list 12 to GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos pq pql 12
qos pql default-queue
Use qos pql default-queue to specify a priority queue as the default queue for a PQ list.
Use undo qos pql default-queue to restore the default.
Syntax
qos pql pql-index default-queue { bottom | middle | normal | top }
undo qos pql pql-index default-queue
Default
The normal queue is the default queue for a PQ list.
Views
System view
90