Qos Cql Default-Queue - HPE FlexNetwork HSR6800 series Command Reference Manual

Views
Interface view
Predefined user roles
network-admin
Parameters
cql cql-index: Specifies a CQ list by its number in the range of 1 to 16.
Usage guidelines
If you execute this command multiple times on an interface, the most recent configuration takes
effect.
Multiple match criteria can be configured for a CQ list. When a packet arrives, it is examined against
match criteria in their configuration order.
•
When a match is found, the packet is assigned to the corresponding queue, and the matching
process ends.
•
If no match is found, the packet is assigned to the default queue.
You must configure the rate limit for the CQ feature to take effect on the following interfaces:
•
Tunnel interfaces.
•
Subinterfaces.
•
Layer 3 aggregate interfaces.
•
HDLC link bundle interfaces.
•
VT interfaces configured with PPPoE.
Examples
# Apply CQ list 5 to GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos cq cql 5

qos cql default-queue

Use qos cql default-queue to specify a custom queue as the default queue for a CQ list.
Use undo qos cql default-queue to restore the default.
Syntax
qos cql cql-index default-queue queue-id
undo qos cql cql-index default-queue
Default
Queue 1 is the default queue.
Views
System view
Predefined user roles
network-admin
Parameters
cql-index: Specifies a CQ list by its number in the range of 1 to 16.
queue-id: Specifies a custom queue by its ID in the range of 1 to 16.
97