Traffic Behavior - HPE FlexNetwork HSR6800 series Command Reference Manual

Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
service-class-value: Specifies the MPLS TE CoS in the range of 0 to 7.
Usage guidelines
The remark service-class action can take effect only on the inbound direction of an interface.
If you execute the remark service-class command multiple times in the same traffic behavior, the
most recent configuration takes effect.
You can use the mpls te service-class command to set the MPLS TE CoS. For more information,
see MPLS TE commands in MPLS Command Reference.
Examples
# Configure an action of marking the MPLS TE CoS as 2.
<Sysname> system-view
[Sysname] traffic behavior data
[Sysname-behavior-data] remark service-class 2

traffic behavior

Use traffic behavior to create a traffic behavior and enter its view, or enter the view of an existing
traffic behavior.
Use undo traffic behavior to delete a traffic behavior.
Syntax
traffic behavior behavior-name
undo traffic behavior behavior-name
Default
No traffic behaviors exist.
Views
System view
Predefined user roles
network-admin
Parameters
behavior-name: Specifies a name for the traffic behavior, a case-sensitive string of 1 to 31
characters.
Examples
# Create a traffic behavior named behavior1.
<Sysname> system-view
[Sysname] traffic behavior behavior1
[Sysname-behavior-behavior1]
Related commands
display traffic behavior
53