If-Match - HPE FlexNetwork HSR6800 series Command Reference Manual

Rule(s) :
If-match not protocol ipv6
Classifier: 3 (ID 102)
Operator: AND
Rule(s) :
-none-
# Display the system-defined traffic class (default-class).
<Sysname> display traffic classifier system-defined default-class
System-defined classifier information:
Classifier: default-class (ID 0)
Operator: AND
Rule(s) :
If-match any
Table 15 Command output
Field
Classifier
Operator
Rule(s)

if-match

Use if-match to define a match criterion.
Use undo if-match to delete a match criterion.
Syntax
if-match [ not ] match-criteria
undo if-match [ not ] match-criteria
Default
No match criterion is configured.
Views
Traffic class view
Predefined user roles
network-admin
Parameters
not: Matches packets that do not conform to the specified criterion.
match-criteria: Specifies a match criterion.
Description
Traffic class name and its match criteria.
Match operator you set for the traffic class. If the operator is AND, the traffic class
matches the packets that match all its match criteria. If the operator is OR, the traffic
class matches the packets that match any of its match criteria.
Match criteria.
Table 16 shows the available match criteria.
36