HPE FlexNetwork HSR6800 series Command Reference Manual page 19

IPv4 ACL 2001
rule 0 permit
rule 5 permit source 1.1.1.1 0 (Failed)
rule 10 permit vpn-instance test (Failed)
IPv4 ACL 2002 (Failed), Hardware-count (Failed)
IPv6 ACL 2000
rule 0 permit
IPv4 default action: Deny
IPv6 default action: Deny
Table 6 Command output
Field
Interface
Inbound policy
Outbound policy
IPv4 ACL 2001
IPv4 ACL 2002 (Failed)
Hardware-count
Hardware-count (Failed)
rule 5 permit source 1.1.1.1 0 (Failed)
IPv4 default action
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
The device has failed to apply IPv4 basic ACL 2002.
ACL rule match counting has been successfully enabled.
The device has failed to enable counting ACL rule matches.
The device has failed to apply rule 5.
Packet filter default action for packets that do not match any
IPv4 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the default
action deny for packet filtering. The action permit still
functions.
•
Permit—The default action permit has been successfully
applied for packet filtering.
•
Hardware-count—The hardware-count feature has
been successfully applied for the default action for packet
filtering.
•
Hardware-count (Failed)—The device has failed to
apply the hardware-count feature for the packet filtering
default action.
14