Display Qos Cql; Qos Cq - HPE FlexNetwork HSR6800 series Command Reference Manual

display qos cql

Use display qos cql to display the CQ list configuration.
Syntax
In standalone mode:
display qos cql [ cql-index ] [ slot slot-number ]
In IRF mode:
display qos cql [ cql-index ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
cql-index: Specifies a CQ list by its number in the range of 1 to 16. If you do not specify a CQ list, this
command displays the configuration of all CQ lists.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays the CQ list configuration for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
the CQ list configuration for the global active MPU. (In IRF mode.)
Examples
# Display the configuration of all CQ lists.
<Sysname> display qos cql
Current CQL configuration:
List Queue
------------------------------------------------------
2 3
3 6
3 1
4 5

qos cq

Use qos cq to apply a CQ list to an interface.
Use undo qos cq to restore the default.
Syntax
qos cq cql cql-index
undo qos cq
Default
An interface uses FIFO queuing.
Parameters
Protocol ip fragments
Length 100
Inbound-interface GigabitEthernet2/1/1
Local-precedence 7
96