Fr Del Inbound-Interface - HPE FlexNetwork HSR6800 series Command Reference Manual

After a DE rule list is applied to an FR PVC, the DE bits of packets matching the DE rule list are set to
1.
Examples
# Apply DE rule list 3 to DLCI 100 of Serial 2/1/1.
<Sysname> system-view
[Sysname] interface Serial 2/1/1
[Sysname-Serial2/1/1] fr dlci 100
[Sysname-Serial2/1/1-fr-dlci-100] quit
[Sysname-Serial2/1/1] fr de del 3 dlci 100
[Sysname-Serial2/0] fr de del 3 dlci 100
Related commands

fr del inbound-interface

fr del protocol
fr del inbound-interface
Use fr del inbound-interface to create a DE rule list and add an interface-based DE rule.
Use undo fr del inbound-interface to delete an interface-based DE rule from a DE rule list.
Syntax
fr del list-number inbound-interface interface-type interface-number
undo fr del list-number inbound-interface interface-type interface-number
Default
No DE rule lists exist.
Views
System view
Predefined user roles
network-admin
Parameters
list-number: Specifies a DE rule list number in the range of 1 to 10.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
This command sets the DE bits of packets that are received on the specified interface to 1.
You can add a maximum of 100 rules for a DE rule list.
When the last DE rule in a DE rule list is deleted, the DE rule list is also deleted.
Examples
# Add a rule to DE rule list 1. The rule sets the DE bits of incoming packets on Serial 2/1/1 to 1.
<Sysname> system-view
[Sysname] fr del 1 inbound-interface serial 2/1/1
Related commands
fr de del
fr del protocol
132