Acl Trap Interval; Description - HPE FlexNetwork HSR6800 series Command Reference Manual

rule (IPv6 advanced ACL view)
rule (IPv6 basic ACL view)

acl trap interval

Use acl trap interval to enable SNMP notifications for packet filtering and set the interval.
Use undo acl interval to restore the default.
Syntax
acl trap interval interval
undo acl trap interval
Default
The interval is 0. The device does not generate SNMP notifications for packet filtering.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the interval at which SNMP notifications are generated and output. It must be a
multiple of 5, in the range of 0 to 1440 minutes. To disable SNMP notifications, set the value to 0.
Usage guidelines
The SNMP notifications feature is available for the following ACL rules that have the logging
keyword:
•
IPv4 basic ACL rules.
•
IPv4 advanced ACL rules.
•
IPv6 basic ACL rules.
•
IPv6 advanced ACL rules.
If an ACL is matched for the first time, the device immediately outputs a notification to record the
matching packet.
Examples
# Configure the device to generate and output packet filtering SNMP notifications every 10 minutes.
<Sysname> system-view
[Sysname] acl trap interval 10
Related commands
rule (IPv4 advanced ACL view)
rule (IPv4 basic ACL view)
rule (IPv6 advanced ACL view)
rule (IPv6 basic ACL view)

description

Use description to configure a description for an ACL.
Use undo description to delete an ACL description.
5