Queue-Length - HPE FlexNetwork HSR6800 series Command Reference Manual

Default
WFQ is not configured for the default class.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
queue-number total-queue-number: Specifies the number of fair queues, which can be 16, 32, 64,
128, 256, 512, 1024, 2048, or 4096. The default is 256.
Usage guidelines
The traffic behavior configured with this command can only be associated with the default class. This
command can be used in conjunction with the queue-length or wred command in the same traffic
behavior.
Examples
# Configure the default class to use WFQ with 16 queues.
<Sysname> system-view
[Sysname] traffic behavior test
[Sysname-behavior-test] queue wfq queue-number 16
[Sysname] qos policy user1
[Sysname-qospolicy-user1] classifier default-class behavior test
Related commands
display qos queue cbq interface
traffic behavior

queue-length

Use queue-length to set the maximum queue length and use tail drop.
Use undo queue-length to restore the default.
Syntax
queue-length queue-length
undo queue-length
Default
Tail drop is used, and the queue length is 64.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
queue-length: Specifies the maximum queue length in the range of 1 to 1024.
Usage guidelines
Before configuring this command, make sure the queue af command or the queue wfq command
has been configured.
111