Acl Commands; Accelerate; Acl - HPE FlexNetwork HSR6800 series Command Reference Manual

ACL commands

accelerate

Use accelerate to enable ACL acceleration.
Use undo accelerate to disable ACL acceleration.
Syntax
accelerate
undo accelerate
Default
ACL acceleration is disabled.
Views
IPv4 basic/advanced ACL view
IPv6 basic/advanced ACL view
Predefined user roles
network-admin
Usage guidelines
This command does not take effect if the hardware resources are insufficient. When the hardware
resources become sufficient, the following operations will make ACL acceleration take effect:
•
Execute the accelerate command again.
•
Modify, add, or delete rules for the ACL.
You can modify, add, or delete rules for an accelerated ACL. The rule adding or modification
operation fails if the hardware resources are insufficient. The failure does not affect the accelerated

ACL.

Examples
# Enable ACL acceleration for ACL 2000.
<Sysname> system-view
[Sysname] acl basic 2000
[Sysname-acl-ipv4-basic-2000] accelerate
Related commands
display acl accelerate
acl
Use acl to create an ACL and enter its view, or enter the view of an existing ACL.
Use undo acl to delete the specified or all ACLs.
Syntax
acl [ ipv6 ] { advanced | basic } { acl-number | name acl-name } [ match-order { auto | config } ]
undo acl [ ipv6 ] { all | { advanced | basic } { acl-number | name acl-name } }
1