Display Fr Class-Map - HPE FlexNetwork HSR6800 series Command Reference Manual

Usage guidelines
The outbound CIR ALLOW must be greater than or equal to the CIR.
If you do not specify the inbound or outbound keyword, the set CIR ALLOW takes effect on both
incoming and outgoing packets.
Examples
# Set the CIR ALLOW to 64000 bps for FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cir allow 64000

display fr class-map

Use display fr class-map to display the associations between FR classes and interfaces (including
subinterfaces and PVCs).
Syntax
display fr class-map [ fr-class class-name | interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
fr-class class-name: Specifies an FR class by its name, a case-sensitive string of 1 to 30 characters.
interface interface-type interface-number: Specifies an interface (main interface or subinterface) by
its type and number. If you specify a main interface, the command displays the associations between
the following elements:
•
The FR class and the main interface.
•
The FR classes and the subinterfaces on the main interface.
•
The FR classes and the PVCs on the main interface.
•
The FR classes and the PVCs on each subinterface.
If you specify a subinterface, the command displays the associations between the following
elements:
•
The FR class and the subinterface.
•
The FR classes and the PVCs on the subinterface.
Usage guidelines
If you do not specify an FR class or an interface, the command displays all associations between FR
classes and interfaces.
Examples
# Display the associations between Serial 2/1/1 and FR classes.
<Sysname> display fr class-map interface serial 2/1/1
Serial2/1/1
fr-class ts1
fr dlci 100
fr-class ts
127