Cbq Commands; Display Qos Queue Cbq - HPE FlexNetwork HSR6800 series Command Reference Manual

Examples
# Enable RTPQ on GigabitEthernet 2/1/1 for RTP packets with a destination UDP port number in the
range of 16384 to 32767.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos rtpq start-port 16384 end-port 32767 bandwidth 64

CBQ commands

display qos queue cbq

Use display qos queue cbq to display the CBQ information for interfaces or PWs.
Syntax
display qos queue cbq { interface [ interface-type interface-number ] | l2vpn-pw [ peer ip-address
pw-id pw-id ] }
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command the CBQ information for all interfaces.
peer ip-address pw-id pw-id: Specifies a PW by its peer PE LSR ID and its PW ID. The ip-address
argument represents the LSR ID of the peer PE of the PW. The value range for the pw-id argument is
1 to 4294967295. If you do not specify a PW, this command displays the CBQ information for all
PWs.
Examples
# Display the CBQ information for all interfaces.
<Sysname> display qos queue cbq interface
Interface: GigabitEthernet2/1/1
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - Class Based Queuing: Size/Discards 0/0
Queue Size: EF/AF/BE 0/0/0
BE Queues: Active/Max active/Total 0/0/256
AF Queues: Allocated 1
Bandwidth(kbps): Available/Max reserve 74992/75000
# Display the CBQ information for all PWs.
<Sysname> display qos queue cbq l2vpn-pw
L2VPN-PW: peer 1.1.1.1, pw-id 1
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - Class Based Queuing: Size/Discards 0/0
Queue Size: EF/AF/BE 0/0/0
106