HPE FlexNetwork HSR6800 series Command Reference Manual page 45

# Define a match criterion for traffic class class1 to match all packets.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match any
# Define a match criterion for traffic class class1 to match the packets with a DSCP value of 1, 6, or
9.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match dscp 1 6 9
# Define a match criterion for traffic class class1 to match the packets with an IP precedence value
of 1 or 6.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match ip-precedence 1 6
# Define a match criterion for traffic class class1 to match the packets with a local precedence value
of 1 or 6.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match local-precedence 1 6
# Define a match criterion for traffic class class1 to match IP packets.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match protocol ip
# Define a match criterion for traffic class class1 to match the RTP packets with even UDP
destination port numbers in the range of 16384 to 32767.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match rtp start-port 16384 end-port 32767
# Define a match criterion for traffic class class1 to match the packets with a local QoS ID of 3.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match qos-local-id 3
# Define a match criterion for traffic class class1 to match the packets of the application group
multimedia.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match app-group multimedia
# Define a match criterion for traffic class class1 to match the packets of the application 3link.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match app-name 3link
# Define a match criterion for traffic class class1 to match packets with the length in the range of 100
to 200 bytes.
<Sysname> system-view
[Sysname] traffic classifier class1
[Sysname-classifier-class1] if-match packet-length min 100 max 200
40