Qos Gts - HPE FlexNetwork HSR6800 series Command Reference Manual

Field
Queue Size
Passed
Discarded
Delayed

qos gts

Use qos gts to set GTS parameters on an interface.
Use undo qos gts to delete the GTS configuration on an interface.
Syntax
qos gts { any | acl [ ipv6 ] acl-number } cir committed-information-rate [ cbs committed-burst-size
[ ebs excess-burst-size ] ] [ queue-length queue-length ]
undo qos gts { any | acl [ ipv6 ] acl-number }
Default
No GTS parameters are configured on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
any: Shapes all packets.
acl [ ipv6 ] acl-number: Performs GTS for packets matching an ACL specified by its number. If you
do not specify ipv6, this option specifies an IPv4 ACL. If you specify ipv6, this option specifies an
IPv6 ACL.
cir committed-information-rate: Specifies the CIR in kbps.
cbs committed-burst-size: Specifies the CBS in bytes.
ebs excess-burst-size: Specifies the EBS in bytes, which is the traffic exceeding CBS when two
token buckets are used.
queue-length queue-length: Specifies the maximum queue length in the buffer.
Usage guidelines
To use two rates for traffic shaping, configure the qos gts command with the pir
peak-information-rate option. To use one rate for traffic shaping, configure the qos gts command
without the pir peak-information-rate option.
Examples
# Shape the packets matching ACL 2001 on GigabitEthernet 2/1/1. The GTS parameters are as
follows:
•
The CIR is 200 kbps.
•
The CBS is 51200 bytes.
•
The EBS is 0.
•
The maximum buffer queue length is 100.
Description
Number of packets in the buffer.
Number and bytes of packets that have been forwarded.
Number and bytes of dropped packets.
Number and bytes of delayed packets.
80