Congestion Management Commands; Common Commands; Display Qos Queue Interface - HPE FlexNetwork HSR6800 series Command Reference Manual

Congestion management commands

Common commands

display qos queue interface

Use display qos queue interface to display the queuing information for interfaces.
Syntax
display qos queue interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the queuing information for all interfaces.
Examples
# Display the queuing information for all interfaces.
<Sysname> display qos queue interface
Interface: GigabitEthernet2/1/1
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - Weighted Fair queuing: Size/Length/Discards 0/64/0
Weight: IP Precedence
Queues: Active/Max active/Total 0/0/128
Interface: GigabitEthernet2/1/2
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
Table 26 Command output
Field
Interface
Size
Length
Discards
Weight
Active
Description
Interface name, including the interface type and interface number.
Total number of bytes of packets in all queues.
Number of packets allowed in each queue.
Number of packets dropped.
Weight type:
•
IP Precedence.
•
DSCP.
Number of active WFQ queues.
84