Qos Cql Protocol - HPE FlexNetwork HSR6800 series Command Reference Manual

undo qos cql cql-index local-precedence local-precedence-list
Default
No assignment rule is configured for a CQ list.
Views
System view
Predefined user roles
network-admin
Parameters
cql-index: Specifies a CQ list by its number in the range of 1 to 16.
local-precedence-list: Specifies a space-separated list of up to eight local precedence values. The
value range is 0 to 7.
queue-id: Specifies a custom queue by its ID in the range of 1 to 16.
Usage guidelines
You can configure this command multiple times for the same CQ list to establish multiple assignment
rules based on local precedence values.
Examples
# In CQ list 5, assign packets with local precedence 4 to custom queue 3.
<Sysname> system-view
[Sysname] qos cql 5 local-precedence 4 queue 3

qos cql protocol

Use qos cql protocol to configure an assignment rule for a CQ list to assign packets of the specified
protocol type to a custom queue.
Use undo qos cql protocol to delete an assignment rule based on the specified protocol type from
a CQ list.
Syntax
qos cql cql-index protocol { ip | ipv6 } [ queue-key key-value ] queue queue-id
undo qos cql cql-index protocol { ip | ipv6 } [ queue-key key-value ]
Default
No assignment rule is configured for a CQ list.
Views
System view
Predefined user roles
network-admin
Parameters
cql-index: Specifies a CQ list by its number in the range of 1 to 16.
queue-id: Specifies a custom queue by its ID in the range of 1 to 16.
queue-key key-value: Matches specific IP or IPv6 packets. If you specify neither the queue-key
argument nor the key-value argument, all IP or IPv6 packets are matched.
99