Qos Cql Protocol Mpls Exp - HPE FlexNetwork HSR6800 series Command Reference Manual

Table 32 Values of the queue-key argument and the key-value argument
queue-key
acl
fragments
greater-than
less-than
tcp
udp
Usage guidelines
When classifying a packet, the system matches the packet against match criteria in their
configuration order. When a match is found, the matching process ends.
You can configure this command multiple times for the same CQ list to establish multiple assignment
rules based on protocol types.
Examples
# In CQ list 5, assign IP packets matching ACL 3100 to custom queue 3.
<Sysname> system-view
[Sysname] qos cql 5 protocol ip acl 3100 queue 3

qos cql protocol mpls exp

Use qos cql protocol mpls exp to configure an assignment rule for a CQ list to assign packets with
any of the specified MPLS EXP values to a custom queue.
Use undo qos cql protocol mpls exp to delete an assignment rule based on the specified MPLS
EXP values from a CQ list.
Syntax
qos cql cql-index protocol mpls exp exp-list queue queue-id
undo qos cql cql-index protocol mpls exp exp-list
Default
No assignment rule is configured for a CQ list.
Views
System view
Predefined user roles
network-admin
Parameters
cql-index: Specifies a CQ list by its number in the range of 1 to 16.
exp-list: Specifies a space-separated list of up to eight MPLS EXP values. The value range is 0 to 7.
queue-id: Specifies a custom queue by its ID in the range of 1 to 16.
key-value
ACL number in the range of
2000 to 3999
N/A
Length in the range of 0 to
65535
Length in the range of 0 to
65535
Port number in the range of 0 to
65535 or port name
Port number in the range of 0 to
65535 or port name
Description
Packets matching a specific ACL are enqueued.
Fragmented packets are enqueued.
Packets greater than a specific size are enqueued.
Packets smaller than a specific size are enqueued.
Packets with a specific source or destination TCP port
number are enqueued.
Packets with a specific source or destination UDP port
number are enqueued.
100