HPE FlexNetwork HSR6800 series Command Reference Manual page 63

Predefined user roles
network-admin
network-operator
Parameters
number: Specifies a tunnel interface by its number in the range of 0 to 20479.
ipv4-address: Specifies the spoke's private IPv4 address of a hub-spoke tunnel.
Ipv6-address: Specifies the spoke's private IPv6 address of a hub-spoke tunnel.
outbound: Displays the QoS policy applied to outgoing traffic.
Usage guidelines
If you do not specify a spoke's private IP address of a hub-spoke tunnel, this command displays the
QoS policy information for all hub-spoke tunnels on a tunnel interface. For information about
hub-spoke tunnels, see ADVPN in Layer 3—IP Services Configuration Guide.
If you do not specify a direction, this command displays the QoS policy applied to incoming traffic
and the QoS policy applied to outgoing traffic.
Examples
# Display the QoS policy applied to the outgoing traffic of all hub-spoke tunnels on tunnel interface 1.
<Sysname> display qos policy advpn tunnel 1 outbound
Session: Tunnel1 192.168.0.3
Direction: Outbound
Policy: finance
Classifier: default-class
Matched : 0 (Packets) 0 (Bytes)
Operator: AND
Rule(s) :
If-match any
Behavior: be
-none-
Classifier: finance
Matched : 123713988 (Packets) 13608538380 (Bytes)
Operator: AND
Rule(s) :
If-match any
Behavior: finance
Committed Access Rate:
CIR 1500 (kbps), CBS 93750 (Bytes), EBS 0 (Bytes)
Green action
Yellow action : pass
Red action
Green packets : 14980239 (Packets) 1647826290 (Bytes)
Yellow packets: 0 (Packets) 0 (Bytes)
Red packets
Session: Tunnel1 192.168.0.4 (inactive)
Direction: Outbound
Policy: business
: pass
: discard
: 108733781 (Packets) 11960715910 (Bytes)
58