Display Qos Pql - HPE FlexNetwork HSR6800 series Command Reference Manual

Field
Length
Discards
Top
Middle
Normal
Bottom

display qos pql

Use display qos pql to display the PQ list configuration.
Syntax
In standalone mode:
display qos pql [ pql-index ] [ slot slot-number ]
In IRF mode:
display qos pql [ pql-index ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pql-index: Specifies a PQ list by its number in the range of 1 to 16.
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays the PQ list configuration for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
the PQ list configuration for the global active MPU. (In IRF mode.)
Examples
# Display the configuration of all PQ lists.
<Sysname> display qos pql
Current PQL configuration:
List Queue
------------------------------------------------------
1 Top
2 Normal
2 Bottom
3 Middle
4 Top
Description
Number of packets allowed in each queue.
Number of dropped packets.
Top priority queue.
Middle priority queue.
Normal priority queue.
Bottom priority queue.
Parameters
Protocol ip less-than 1000
Length 80
Length 40
Inbound-interface GigabitEthernet2/1/1
Local-precedence 7
89