Fr Traffic-Shaping; Fr-Class - HPE FlexNetwork HSR6800 series Command Reference Manual

Usage guidelines
FRTP is applicable only to the ingress interfaces on the DCE of an FR network.
Examples
# Enable FRTP on Serial 2/1/1.
<Sysname> system-view
[Sysname] interface Serial 2/1/1
[Sysname-Serial2/1/1] fr traffic-policing
Related commands
fr class

fr traffic-shaping

Use fr traffic-shaping to enable FRTS.
Use undo fr traffic-shaping to disable FRTS.
Syntax
fr traffic-shaping
undo fr traffic-shaping
Default
FRTS is disabled.
Views
FR interface view
Predefined user roles
network-admin
Usage guidelines
FRTS is applied to the outgoing interfaces and is typically used on the DTEs of an FR network.
FRTS cannot be enabled on an FR interface when fragmentation is enabled on the interface.
Examples
# Enable FRTS on Serial 2/1/1.
<Sysname> system-view
[Sysname] interface serial 2/1/1
[Sysname-Serial2/1/1] fr traffic-shaping

fr-class

Use fr-class to associate an FR class with an FR interface or FR PVC.
Use undo fr-class to cancel the association.
Syntax
fr-class class-name
undo fr-class class-name
Default
An FR class is not associated with any FR interface or FR PVC.
136