Fr Qos Commands; Cbs; Cir - HPE FlexNetwork HSR6800 series Command Reference Manual

FR QoS commands

cbs

Use cbs to set the CBS for an FR class.
Use undo cbs to delete the CBS setting of an FR class.
Syntax
cbs [ inbound | outbound ] committed-burst-size
undo cbs [ inbound | outbound ]
Default
The CBS for an FR class is 56000 bits.
Views
FR class view
Predefined user roles
network-admin
Parameters
inbound: Sets the CBS for incoming packets. The inbound CBS does not take effect for FR traffic
shaping (FRTS).
outbound: Sets the CBS for outgoing packets. The outbound CBS does not take effect for FR traffic
policing (FRTP).
committed-burst-size: Sets the CBS in the range of 300 to 16000000 bits. The default is 56000 bits.
Usage guidelines
If you do not specify the inbound or outbound keyword, the set CBS takes effect on both incoming
and outgoing packets.
Examples
# Set the CBS to 64000 bits for both incoming and outgoing packets of the FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cbs 64000
Related commands

cir

cir allow
ebs
cir
Use cir to set the CIR for an FR class.
Use undo cir to restore the default.
Syntax
cir committed-information-rate
125