Display Acl Accelerate - HPE FlexNetwork HSR6800 series Command Reference Manual

To specify the IPv4 ACL type, do not specify the ipv6 keyword.
Examples
# Display configuration and match statistics for IPv4 basic ACL 2001.
<Sysname> display acl 2001
Basic IPv4 ACL 2001, 2 rules, match-order is auto,
This is an IPv4 basic ACL.
ACL's step is 5
ACL accelerated
rule 5 permit source 1.1.1.1 0
rule 5 comment This rule is used on GigabitEthernet 2/1/1.
rule 10 permit source object-group permit
Table 1 Command output
Field
Basic IPv4 ACL 2001
2 rules
match-order is auto
This is an IPv4 basic ACL.
ACL's step is 5
ACL accelerated
rule 5 permit source 1.1.1.1 0
rule 10 permit source
object-group permit
rule 5 comment This rule is
used on GigabitEthernet 2/1/1.

display acl accelerate

Use display acl accelerate to display ACL acceleration status.
Syntax
In standalone mode:
display acl accelerate { summary [ ipv6 ] | verbose [ ipv6 ] { acl-number | name acl-name } slot
slot-number }
In IRF mode:
display acl accelerate { summary [ ipv6 ] | verbose [ ipv6 ] { acl-number | name acl-name }
chassis chassis-number slot slot-number }
Views
Any view
Predefined user roles
network-admin
network-operator
Description
Type and number of the ACL. The following field information is about IPv4
basic ACL 2001.
The ACL contains two rules.
The match order for the ACL is auto, which sorts ACL rules in depth-first
order. This field is not displayed when the match order is config.
Description of the ACL.
The rule numbering step is 5.
ACL acceleration is enabled for the ACL.
Content of rule 5. The rule permits packets sourced from the IP address
1.1.1.1.
Content of rule 10. The rule permits packets sourced from the object group
permit.
Comment of rule 5.
7